Sika® 1

|
A liquid ready to use waterproofing compound which reacts with the constituents of a sand : cement mix to block capillaries and pores in concrete. Whilst effectively blocking the passage of water, the substrate still continues to breath. Chloride free.
|
Sika® 102

|
Sika® 102 is a chloride free, ready for use powder. When mixed with water, it becomes a powerful fast-setting permanent waterplug.
|
SikaTop® 107 Seal

|
2-component, pre-dosed, ready for use waterproofing slurry based on resin modified cementitious material.
|
Sika® Waterproofing Mortar

|
An easy to use cement-based; powder containing waterproofing additives. After mixing with water into a slurry consistency, it is applied to concrete substrates to seal against water infiltration, of meteoric water or in areas of low pressure.
|
Sika® RainTite

|
Sika® RainTite waterproofing system consists of a combination of : Sika® RainTite Waterproofing Compound: Highly flexible UV resistant acrylic emulsion Sika® RainTite Membrane: Non-woven polyester membrane The system forms a fully bonded, durable, flexible
|
Sika® MultiSeal

|
Self-adhesive, rubber modified, bituminous sealing tape, one side laminated with aluminium foil.
|
Sika® BituSeal® T-130 SG

|
A torch-o sheet waterproofing membrane that is flexible to 0°C. It is based of APP (Atactic Poly-Propylene) modified bitumen, reinforced with Polyester non woven fabric.
|
Sikalastic® 560

|
Sikalastic® 560 is a cold-applied, one-component solvent free liquid applied waterproofing membrane, highly elastic and UV-resistant.
|
Sikalastic® 612

|
Sikalastic® 612 is a single component, cold-applied, moisture-triggered polyurethane membrane. It cures to form a seamless and durable waterproofing solution for exposed roof areas.
|
Sikalastic® 870 BT

|
Sikalastic® 870 BT is a two part, elastic, 100% solids, very fast curing polyurea spray applied membrane where exposure to high acidic and alkaline chemical concentrations are present. Sikalastic® 870 BT is for machine application only.
|
Sikalastic® 871 JW

|
Sikalastic® 871 JW is a two part, elastic, 100% solids, very fast curing polyurea spray applied membrane especially designed for the use in potable water installations, reservoirs and fish distribution pools. Sikalastic® 871 JW is for machine application only.
|
Sikalastic® 901

|
Sikalastic® 901 is a two part, elastic, crack-bridging, rapid-curing polyurethane membrane. Sikalastic® 901 is for machine application only.
|
Sikalastic® 1000 GET

|
Sikalastic® 1000 GET is a two part, elastic, crack-bridging, rapid-curing polyurethane membrane especially designed for the GET spray system. In combination with the special GET nozzle it forms a low density waterproofing membrane with closed micro-cell structure.
|
Sika® Sarnafil® S 327 L (Mechanically Fastened)

|
Sika® Sarnafil® is your professional partner in single-ply roofing membrane. Sika® Sarnafil® provides long term protection for your roof from the effects of weathering, water ingress, and moisture penetration.
|
Sika® Sarnafil® G 410 L Felt (Fully Adhered)

|
Sika® Sarnafil® is your professional partner in single-ply roofing membrane. Sika® Sarnafil® provides long term protection for your roof from the effects of weathering, water ingress, and moisture penetration.
|
Sika® Sarnafil® G 476 (Roof Garden)

|
Sika® Sarnafil® is your professional partner in single-ply roofing membrane. Sika® Sarnafil® provides long term protection for your roof from the effects of weathering, water ingress, and moisture penetration.
|